Lash retention products strengthen the bond between the extension and the natural lash. London Lash stocks Superbonder sealant, pre-treatment cleanser and primer, and the Retention & Speed Booster, a five-step professional system, with 2ml samples from £4.99. Formulated for qualified lash technicians, these products address every stage of the application process to ensure maximum adhesive performance, fast treatment times, and long-lasting client sets.
Superbonder is a finishing sealant that instantly polymerises lash adhesive without shock curing, adding flexibility to the bond, locking in fumes, and making the set safe to get wet immediately. Applied at the very end of the treatment once the set is complete, it cures the glue instantly while retaining structural elasticity so bonds flex naturally rather than snap when brushed.
By instantly curing the adhesive, Superbonder Sealant traps microscopic glue fumes at the root, drastically reducing eye irritation, red eyes, and chemical sensitivity for your clients. Unlike traditional sets that require a 24–48 hour dry period before water exposure, sets finished with Superbonder allow clients to swim, shower, or wash their face right away. Available in full-size 15ml bottles (£27.99) or a low-risk 2ml sample (£4.99). Note: Superbonder is a cure-accelerating sealant, not an adhesive, and contains zero glue.
Understanding when and where to apply each formula is essential for optimal work speed and client retention.
|
Feature |
Superbonder Sealant |
Retention & Speed Booster |
|
When it's used |
After the lash set is finished |
Before and during application |
|
Applied to |
The finished lash extensions at the root |
The lash extension strip (never natural lashes) |
|
Primary function |
Polymerises adhesive, adds bond elasticity, seals fumes |
Speeds curing time, prevents fan closure |
|
Main benefit |
Instant water exposure, reduced client sensitivity |
Faster application, prevents glue traveling up fibres |
|
Price |
15ml — £27.99 · 2ml sample — £4.99 |
15ml — £21.99 · 2ml sample — £4.99 |
|
Compatibility |
Works with all professional lash adhesives |
Works with all adhesives except Easy Fanning lashes |
|
Bundle & Save |
Available in the Retention DUO (£34.99, save 30%) |
Available in the Retention DUO (£34.99, save 30%) |
The Retention & Speed Booster is a product applied to the lash extension strip that speeds curing, stops adhesive travelling up the fibre, and prevents fans closing during volume work. It accelerates the curing speed of your chosen glue on the strip, giving you total control in high or fluctuating humidity. Important: Retention & Speed Booster must only be applied to the extension strip and is incompatible with Easy Fanning lashes, as it dissolves the base tape.
Thorough prep is the foundation of lash retention. While your adhesive and sealants lock the set in place, our numbered pre-treatment routine removes barrier oils and prepares the natural lash shaft.
Step 1 & Step 2 (Deep Cleansing): Foaming Lash Cleanser and saline solution wash away heavy makeup, skin sebum, and daily oils.
Step 3 — Pre-Treatment Lash Cleanser (£16.99): Removes micro-residue, dust, and stubborn oil deposits. Available in Unscented, Coconut, and Cherry.
Step 4 — Pre-Treatment Lash Primer (£14.99): Pre-treatment primer removes residual oils and optimises the pH of the natural lash so the adhesive can bond. Must be fully dry before adhesive is applied.
Step 5 — Retention & Speed Booster (£21.99): Preps the extension strip to ensure instant attachment and stop volume fans from collapsing.
Technicians looking to streamline their setup can purchase our complete 5-Step Pre-Treatment Kit (£59.99, saving 25%) or explore our full pre-treatment range.
Identifying the root cause of poor retention allows you to select the correct corrective formula:
Oils and Makeup Residue: Natural oils create a barrier between the natural hair cuticle and the glue. Fix: Step 3 Cleanser and Step 4 Primer.
Adhesive Curing Incorrectly: If room humidity causes your glue to dry too slowly, your fans may collapse or lean. Fix: Retention & Speed Booster on the strip, or check our Glue Chart.
Brittle Bonds Snapping: Hard, inflexible glue bonds snap off when brushed or slept on. Fix: Superbonder to add elasticity.
Natural Lash Shedding Cycle: Losing 2–5 natural lashes per day is part of the natural growth cycle and is not caused by product failure.
For additional diagnostic advice, read how to improve lash retention and our breakdown of retention myths.
Superbonder is a finishing sealant applied after a lash set is complete. It instantly polymerises the adhesive without shock curing, adding flexibility to the bond so it flexes rather than snaps. It also locks in adhesive fumes, reducing irritation for sensitive clients, and makes the set safe to get wet immediately rather than after 24–48 hours.
No. Superbonder contains no adhesive and will not attach an extension to anything. It is a sealant applied over adhesive that has already been used, to finish and stabilise the bond. Lash extensions are attached with a separate cyanoacrylate adhesive—Superbonder is the step that comes after.
Timing and purpose. Superbonder is applied at the end of the treatment to seal and flex the finished bonds. The Retention & Speed Booster is applied to the lash extension strip before and during application, to speed curing, stop adhesive travelling up the fibre, and keep fans from closing. Many technicians use both—the Retention DUO bundles them at £34.99.
Yes, they solve different problems. Primer works before the adhesive, removing residual oils from the natural lash and optimising its pH so a bond can form at all. Superbonder works after, stabilising the bond that has formed. Primer must be completely dry before adhesive is applied; wet primer weakens the bond.
You do not remove Superbonder separately—it becomes part of the cured bond. When the set is taken off, a professional lash adhesive remover dissolves the adhesive and the sealed bond together. Cream Remover suits full-set removal; Gel Remover suits individual lashes and residue.
Retention usually fails for one of five reasons: oils left on the natural lash, an adhesive too fast or too slow for your room conditions, incomplete isolation, brittle bonds, or poor client aftercare. Work through them in that order—prep first, adhesive second. A proportion of shedding is simply the natural lash cycle and cannot be fixed with a product.